LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2035 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Hood Latch >> Removal

Hood Latch: Removal

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hood latch nut.
    2. NOTE: Mark the hood latch position prior to removal of the hood latch bolts.
  2. Remove the 2 hood latch bolts.
  3. Remove the hood latch.
    1. Release the cable conduit.
    2. Disconnect the cable.
    4. Fig 1: Hood Latch & Cable Conduit
    GF0023803Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals