LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2026 (Power Steering System) >> Removal And Installation >> Power Steering Pump Pulley - 2.3L >> Removal

Power Steering Pump Pulley - 2.3L: Removal

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the accessory drive belt tensioner clockwise and position the accessory drive belt aside.
  2. Remove the 2 A/C manifold and tube assembly bracket nuts and position the bracket aside.
    3. Fig 1: A/C Manifold & Tube Assembly Bracket Nuts
    GF0025591Courtesy of FORD MOTOR CO.
  3. Using the special tool, remove the power steering pump pulley.
    4. Fig 2: Removing Power Steering Pump Pulley
    GF0025592Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals