LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Engine Controls - Removal & Installation - 7.3L 995 & 99F F450/550 Diesel) >> Programming >> Powertrain Control Module (Pcm) Reset >> Resetting KAM

Resetting KAM

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative lead from the battery for a minimum of 5 minutes. After KAM has been reset, DTCs P1000 and P0603 will be stored in the PCM.

scientia non olet · About LEMON Manuals