LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Engine Controls - Removal & Installation - 7.3L 995 & 99F F450/550 Diesel) >> Motors, Relays & Solenoids >> Intake Air Heater Relay Switch >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. On vehicles with dual batteries, see DUAL BATTERIES  under MISCELLANEOUS. Label and disconnect intake heater relay switch leads. Remove retaining nuts and remove relay. See Fig 1. To install, reverse removal procedure.

Fig 1: Removing & Installing Intake Heater Relay Switch
G00248214Courtesy of FORD MOTOR CO.