Removal & Installation
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. On vehicles with dual batteries, see DUAL BATTERIES under MISCELLANEOUS.
- Remove intake air heater element nut and washer. Remove electrical leads, insulator and intake air heater element and copper washer. See Fig 1.
- To install, reverse removal procedure. Tighten intake air heating element to specification. See TORQUE SPECIFICATIONS .