Accelerator Cable - 3.0L (4V): Notes
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | W702251 | Accelerator control cover shield bolts (2 required) |
| 2 | 9E766 | Accelerator control cover shield |
| 3 | - | Accelerator cable-to-throttle body (part of 9A758) |
| 4 | - | Accelerator cable-to-bracket grommet (part of 9A758) |
| 5 | - | Speed control cable-to-throttle body (part of 9A825) |
| 6 | - | Speed control cable-to-bracket grommet (part of 9A825) |
| 7 | W500210 | Accelerator cable bracket bolts (2 required) |
| 8 | 9677 | Accelerator cable bracket |
| 9 | W500210 | Accelerator cable bracket bolt |
| 10 | 9D289A | Accelerator cable bracket |
| 11 | - | Speed control cable pin-type retainer |
| 12 | - | Accelerator cable retainer (part of 9A758) |
| 13 | - | Accelerator cable to pedal (part of 9A758) |
| 14 | - | Accelerator cable grommet (part of 9A758) |
| 15 | 9A758 | Accelerator cable |
| 16 | 9A825 | Speed control cable |