LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2010 (Automatic Transmission - Cd4E) >> Disassembly And Assembly Of Subassemblies >> Final Drive Carrier and Differential Assembly >> Assembly

Final Drive Carrier and Differential Assembly: Assembly

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the differential side gears and thrust washers.
    2. Fig 1: Identifying Differential Side Gears & Differential Side Gear Thrust Washers
    GF0024958Courtesy of FORD MOTOR CO.
  2. Install the differential pinion gears and thrust washers.
    • Rotate the differential pinion gears 90 degrees.
    3. Fig 2: Locating Differential Pinion Gears & Thrust Washers
    GF0024957Courtesy of FORD MOTOR CO.
  3. Install the differential pinion shaft.
    1. Push the pinion shaft in place.
    2. Install the roll pin.
    4. Fig 3: Identifying Differential Pinion Shaft & Roll Pin
    GF0024960Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals