Pinpoint Tests - Non OSC Equipped Vehicle: Notes
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SOLENOID OPERATION CHART
| Transaxle Range Selector Lever Position | PCM Commanded Gear | SSA | SSB | 3-2T/CCS | TCC |
|---|---|---|---|---|---|
| P/N | - | OFF | ON | ON | OFF |
| R | - | OFF | ON/OFF | ON | a |
| Overdrive (Circle D) | 1 | ON | ON | ON | a |
| 2 | OFF | ON | ON | b | |
| 3 | OFF | OFF | ON | b | |
| 4 | ON | OFF | ON | b | |
| D | 1 | ON | ON | ON | a |
| OD cancelled | 2 | OFF | ON | OFF | b |
| 3 | OFF | OFF | OFF | b | |
| 2 | 2 | OFF | ON | OFF | b |
| 2c | 3 | OFF | OFF | OFF | b |
| 1 | 1 | ON | ON | OFF | a |
| 1c | 2 | OFF | ON | OFF | b |
| 1c | 3 | OFF | OFF | OFF | b |
a Not allowed by hydraulics.
b Powertrain control module (PCM) commanded.
c When a manual pull-in occurs above a calibrated speed, the transaxle will not downshift from the higher gear until the vehicle speed drops below this calibrated speed.