LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Engine Controls - Removal & Installation - Diesel) >> Sensors & Switches >> Idle Validation Switch >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Idle validation switch is part of accelerator pedal assembly. For removal and installation, see ACCELERATOR PEDAL SENSOR  .

scientia non olet · About LEMON Manuals