LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2006 (Electronic Engine Controls - 2.3L - (Except Hybrid)) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Camshaft position (CMP) sensor bolt 7 - 62
Crankshaft position (CKP) sensor boltsa - - -
Cylinder head temperature (CHT) sensor 12 9 -
Engine plug bolt 20 15 -
Fuel rail pressure and temperature sensor bolts 5 - 44
Heated oxygen sensors (HO2S) and catalyst monitor sensors 48 35 -
Idle air control (IAC) valve bolts 10 - 89
Knock sensor (KS) bolt 20 15 -
Mass air flow (MAF) sensor screws 10 - 89
Powertrain control module (PCM)-to-dash stud bolts and nut 6 - 53
Snow shield screws 10 - 89
Splash shield bolts 9 - 80
Throttle position (TP) sensor screws 10 - 89

a Refer to the procedure for specification.