LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Controls - Removal & Installation - Gasoline) >> Programming >> Flash Electrically ERASEABLE Programmable Read Only Memory (Flash EEPROM) >> Making Changes To The VID Block

Making Changes To The VID Block

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

A PCM which is programmed may require changes to be made to certain VID information to accommodate vehicle hardware. Refer to PCM/MODULE REPROGRAMMING on the scan tool.