LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Controls - Removal & Installation - Gasoline) >> Emission Systems & Sub-Systems >> Vapor Line Connections

Vapor Line Connections

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: The evaporative emission system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents the danger of explosion or fire.

Disconnect battery ground cable. Disconnect vapor tube from the fitting. Squeeze fitting. Disconnect vapor tube from fitting. See Fig 1. Inspect fitting and tube for damage. Remove any dirt or obstructions. Push tube into fitting until it snaps in place. Pull on the connection to make sure the fitting is secure.

Fig 1: Disconnecting Vapor Tube Fitting
G00096787Courtesy of FORD MOTOR CO.