LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1975 (Engine Controls - Powertrain DTC Charts And Descriptions - (Hybrid)) >> DTC Diagnosis >> U2050 - No Application Present

U2050 - No Application Present

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
U2050 - NO APPLICATION PRESENT

Description:  This DTC indicates missing or incomplete software in the transaxle control module (TCM).
Possible Causes: 
  • TCM programming error
  • Interruption during the TCM programming
Diagnostic Aids:  Program the TCM with the latest software.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   Program the TCM with the latest software.
Note: 'x' equals any number 0 through 9 or letter A through F.
scientia non olet · About LEMON Manuals