LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1975 (Engine Controls - Powertrain DTC Charts And Descriptions - (Hybrid)) >> DTC Diagnosis >> P1635 (Pcm) - Tire/Axle Out Of Acceptable Range

P1635 (Pcm) - Tire/Axle Out Of Acceptable Range

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P1635 (PCM) - TIRE/AXLE OUT OF ACCEPTABLE RANGE

Description:  This DTC indicates the tire and axle information contained in the vehicle ID block (VID) does not match the vehicle hardware.
Possible Causes: 
  • Incorrect tire size
  • Incorrect axle ratio
  • Incorrect VID configuration parameters
Diagnostic Aids:  Using the scan tool, view the tire and axle parameters within the VID. They must match the vehicle hardware.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   - - See Note 11