LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1975 (Engine Controls - Powertrain DTC Charts And Descriptions - (Hybrid)) >> DTC Diagnosis >> P1145 (Pcm) - Calculated Torque Error

P1145 (Pcm) - Calculated Torque Error

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P1145 (PCM) - CALCULATED TORQUE ERROR

Description:  This DTC indicates the engine was overproducing torque and overcharging the traction battery, when its operating temperature was below the calibrated threshold. To protect the traction battery the powertrain control module (PCM) disabled the fuel injectors.
Possible Causes: 
  • Intake air system leak
Diagnostic Aids:  This DTC is informational only. Check for any unmetered air leaks. Diagnose any intake air system related DTCs.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   This DTC is informational only. Check for any unmetered air leaks. Diagnose any intake air system related DTCs.
scientia non olet · About LEMON Manuals