LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1975 (Engine Controls - Powertrain DTC Charts And Descriptions - (Hybrid)) >> DTC Diagnosis >> P0A92 - Hybrid Generator Performance

P0A92 - Hybrid Generator Performance

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0A92 - HYBRID GENERATOR PERFORMANCE

Description:  This DTC indicates a generator concern.
Possible Causes: 
  • Generator resolver
  • Generator resolver/current sensor voltage supply
  • Generator current feedback concern
  • Damaged or seized engine
Diagnostic Aids:  Clear the transaxle control module (TCM) continuous DTCs. Carry out a TCM key on, engine off (KOEO) on demand self-test. If DTC P0A92 is present again, check for damaged or seized engine, and install a new transaxle. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION - ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT) . If the DTC is not present, concern can not be duplicated or identified at this time. refer to PINPOINT TEST Z for intermittent diagnostics.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   See Note 7 - See Note 8