LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1975 (Engine Controls - Powertrain DTC Charts And Descriptions - (Hybrid)) >> DTC Diagnosis >> P0A44 - Drive Motor A Position Sensor Circuit OVERSPEED

P0A44 - Drive Motor A Position Sensor Circuit OVERSPEED

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0A44 - DRIVE MOTOR A POSITION SENSOR CIRCUIT OVERSPEED

Description:  Indicates the transaxle traction motor exceeded its calibrated maximum RPM limit.
Possible Causes: 
  • Vehicle overspeed condition
  • Damaged transaxle
  • Damaged transaxle control module (TCM)
Diagnostic Aids:  Road test the vehicle. The traction motor should not exceed 8,780 RPM at 109 km/h (68 mph).
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   - - refer to PINPOINT TEST TP .
scientia non olet · About LEMON Manuals