LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1968 (Cruise Control System (F-250-F550)) >> Diagnostic Tests >> Speed Control >> Pinpoint Tests >> Pinpoint Test F: The Speed Control Does Not Disengage When The Clutch Is Applied - Diesel Vehicles >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The clutch pedal position (CPP) switch, normally closed, supplies a voltage signal to the powertrain control module (PCM) through circuit 306 (TN/LB). When the clutch pedal is applied, the CPP switch moves to the open position causing the PCM to lose the voltage signal and deactivate the speed control.

Possible Causes

scientia non olet · About LEMON Manuals