LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1958 (Fuel Tank And Fuel Lines - F250-F550) >> Disassembly And Assembly >> Fuel Conditioning Module - 6.0L Diesel >> Disassembly

Fuel Conditioning Module - 6.0L Diesel: Disassembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel filter cover and drain the fuel from the housing.
    • Remove and discard the O-ring.
    2. Fig 1: Locating Fuel Filter Cover
    GF0007680Courtesy of FORD MOTOR CO.
  2. Remove the fuel filter and discard.
    3. Fig 2: Locating Fuel Filter
    GF0007681Courtesy of FORD MOTOR CO.
  3. Remove the screws and the manifold cover.
    • Remove and discard the press-in-place gasket.
    4. Fig 3: Locating Manifold Cover Screws
    GF0007682Courtesy of FORD MOTOR CO.
  4. Remove the return valve assembly.
    5. Fig 4: Locating Return Valve Assembly
    GF0007683Courtesy of FORD MOTOR CO.
  5. Remove the screws and the fuel pump.
    • Remove and discard the O-rings.
    6. Fig 5: Locating Fuel Pump Screws
    GF0007684Courtesy of FORD MOTOR CO.
  6. Remove the screws and the fuel conditioning module mounting bracket.
    7. Fig 6: Locating Fuel Conditioning Module Mounting Bracket Screws
    GF0007685Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals