LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1957 (Fuel Charging And Controls - Turbocharger -- F250-F550 Super Duty 6.0L (99P F450/550)) >> Removal And Installation >> Turbocharger Pedestal >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the turbocharger. For additional information, refer to Turbocharger  in this article.
  2. Remove the 4 bolts and the turbocharger pedestal.
    • To install, tighten to 31 Nm (23 lb-ft).
    3. Fig 1: Locating Turbocharger Pedestal Bolts
    GF0005953Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals