LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1956 (Climate Control System - General Information And Diagnostics - F250-F550) >> General Procedures >> Air Conditioning Line (Peanut) Fitting >> Connect

Air Conditioning Line (Peanut) Fitting: Connect

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all dirt or foreign material from the fittings.
  2. Fig 1: Locating O-Ring Seal
    G03902262Courtesy of FORD MOTOR CO.
    CAUTION: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may result in intermittent leakage during vehicle operation.
  3. Install the O-ring seal.
  4. Fig 2: Identifying Male And Female Halves Of Peanut Fitting
    G03910314Courtesy of FORD MOTOR CO.
    NOTE: When correctly assembled, the male and female fittings should be flush.
  5. Assemble the male and female fittings together.