LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Automatic Transmission - Removal & Installation) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Cross Brace Bolts (Transaxle) 35 (48)
Cross Brace Bolts (Transfer Case) 96 (130)
Crossmember Dampener Bolts 30 (40)
Exhaust Pipe & Flanges Bolts 21 (29)
Flexplate Nuts 27 (36)
Fluid Cooler Line Fitting 17 (23)
Fluid Cooler Tube Bolt 17 (23)
Ground Cable Bolt 20 (27)
PTU Bolts 33 (45)
PTU Bracket Bolts 30 (40)
Rear Transaxle Mount Bolts 35 (48)
RH Engine Mount Bolts 89 (120)
Shift Cable & Bracket Bolts 14 (19)
Starter Motor Bolts 18 (25)
Starter Motor Harness Connector Bolts (1)
Transaxle Mount Assembly Bolts 89 (120)
Transaxle-To-Engine Mounting Bolts 30 (40)
INCH Lbs. (N.m) 
Digital TR Sensor Bolts 89 (10)
Fluid Cooler Tube Support Bolt 115 (13)
OSS Sensor Bolt 115 (13)
Wire Harness Bracket Bolt 89 (10)
(1) For view of specific bolts and tightening specifications, see Figure .