LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1949 (Instrument Cluster System (F250-F550)) >> Removal And Installation >> Instrument Cluster Lens >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster. For additional information, refer to Instrument Cluster (IC) .
  2. Fig 1: Instrument Cluster Lens Clips
    GF0008197Courtesy of FORD MOTOR CO.
  3. Release the clips and remove the cluster lens.
  4. To install, reverse the removal procedure.