LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1940 (Supplemental Inflatable Restraint System - F250-F550) >> Removal And Installation >> Clockspring >> Installation >> Vehicles receiving a new clockspring

Vehicles receiving a new clockspring

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: A new clockspring is supplied in a centralized position and held there with a key.
  1. Remove the key from the clockspring, holding the rotor in its centralized position.
    • Do not allow the clockspring rotor to turn.
scientia non olet · About LEMON Manuals