Possible Causes
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
High resistance between the RCM housing ground and pin ground can be caused by:
- incorrect seating of the RCM retaining bolts.
- incorrect tightening torque of the RCM retaining bolts.
- high resistance on RCM logic ground circuit 649 (BK/OG).
- a faulted RCM.