LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1933 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat Track - With Seat Integrated Restraints (SIR) >> Installation >> Manual seats

Manual seats

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the seat tracks on the seat pedestal frame and install the 7 screws (4 outboard side, 3 inboard side).
    • To install, tighten to 35 Nm (26 lb-ft).
    Fig 1: Locating Seat Adjuster Track Screws
    GF0005044Courtesy of FORD MOTOR CO.
  2. Attach the fore/aft adjuster bar and install new pushclips on each side. Attach the seat assist spring.
    Fig 2: Locating Manual Fore/Aft Adjuster Bar Pushclips
    GF0005041Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals