LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1933 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat Cushion - Front, With Seat Integrated Restraints (SIR) >> Removal >> Power seats

Power seats

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 screws and position the side shield aside.
    Fig 1: Removing Screws And Position Side Shield Aside
    GF0004987Courtesy of FORD MOTOR CO.
  2. Remove the 3 trim support wire screws securing the trim cover side face to the seat track riser.
    Fig 2: Removing Trim Support Wire Screws Securing Trim Cover
    GF0005048Courtesy of FORD MOTOR CO.
  3. Disconnect the power seat switch electrical connector and the seat actuator motors electrical connector. Release the electrical connectors from their cushion pan attachments.
    Fig 3: Disconnecting Power Seat Switch Electrical Connector
    GF0005049Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals