LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1933 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat Cushion - Front, With Seat Integrated Restraints (SIR) >> Installation >> Power seats

Power seats

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the power seat switch electrical connector and the seat actuator motors electrical connector. Attach the connectors to the cushion pan.
    Fig 1: Connecting Power Seat Switch Electrical Connector And Seat Actuator Motors Electrical Connector
    GF0005049Courtesy of FORD MOTOR CO.
  2. Attach the 3 trim support wire screws that secure the trim cover side face to the seat track riser.
    Fig 2: Attaching Trim Support Wire Screws
    GF0005048Courtesy of FORD MOTOR CO.
  3. Position the seat control switch on the side trim panel. Install the 2 screws.
    Fig 3: Locating Seat Control Switch
    GF0004987Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals