Seat Cushion - Front, With Seat Integrated Restraints (SIR): Disassembly
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front seat cushion assembly. For additional information, refer to Seat Cushion - Front, With Seat Integrated Restraints (SIR) in this article.
- Release lower seat cushion fabric J-clips, butterfly clips and scrivets from their seat cushion pan attachment points.
- Remove seat foam pad and fabric covering from the seat cushion pan.
- Separate the seat fabric from the cushion hook and loop fasteners.
WARNING:
The metal edges of seat cushion pan can be sharp.
CAUTION:
Use care when separating the seat cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn from the seat cushion foam.
NOTE:
Do not separate the seat heater mat from the seat cushion foam. These components are glued together and must be repaired or replaced as a unit.