Seat Cushion - Front, With Seat Integrated Restraints (SIR): Assembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Place the seat cushion foam pad on the seat cushion pan.
Position and stretch the seat fabric over the foam cushion while attaching the hook and loop fasteners.

Fig 1: Separating Seat Fabric
Courtesy of FORD MOTOR CO.

WARNING: The metal edges of seat cushion pan can be sharp.

Fig 2: Attaching J-Clips, Butterfly Clips And Scrivets

Courtesy of FORD MOTOR CO.

Attach the J-clips, butterfly clips and scrivets.
Install the front seat cushion assembly. For additional information, refer to Seat Cushion - Front, With Seat Integrated Restraints (SIR) in this article.