Latch Cable Adjustment - Rear, SuperCab
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following adjustment procedure is typical for all SuperCab rear door latch cables and is not required for latch linkage rods and other door cables.
- Remove the slack from the cable without placing any load on the latch.
- Position the cable into the clip.
- Close the clip.