LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1931 (Handles, Locks, Latches And Entry Systems (F250-F550)) >> Diagnostic Tests >> Locks, Latches and Entry Systems - Module Controlled >> Principles of Operation >> Programming Personal Codes

Programming Personal Codes

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

A unique personal 5-digit code can be programmed by following these steps:

  1. Enter the factory set 5-digit code (the keyless entry keypad will illuminate when pressed).
  2. Press the 1/2 button within 5 seconds of Step 1.
  3. Enter the unique 5-digit code.

    4. The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it simply overwrites the previous personal code.

scientia non olet · About LEMON Manuals