LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Analog Instrument Panels - CNG) >> Removal & Installation >> Natural Gas Vehicle Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove coolant recovery tank. Remove Natural Gas Vehicle (NGV) module harness connector cover. Loosen NGV 60-pin harness connector C1009 retaining bolt. Disconnect NGV module 60-pin harness connector C1009.
  2. Remove NGV module bracket retaining bolts. Remove NGV module-to-bracket retaining bolts. Remove NGV module. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals