LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1922 (Automatic Transmission External Controls - F250-F550) >> Diagnostic Tests >> External Controls >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the transmission external control.
  2. Visually inspect for obvious signs of mechanical and electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Damaged brake shift interlock actuator (BSIA)
    • Damaged transmission control (TC) switch
    • Failed fuse(s):
      • F2.27 (10A)
      • F2.24 (15A)
      • F2.34 (10A)
    • Damaged wiring harness
    • Loose or corroded connections
  3. If the fault is not visually evident, determine the symptom. Go to Symptom Chart .