All vehicles

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Replacement of the power steering pump pulley is necessary after being removed and installed 2 times.

Fig 1: Installing Power Steering Pump Pulley Using Special Tool

Courtesy of FORD MOTOR CO.

Using the special tool, install the power steering pump pulley.

NOTE: Vehicle with air conditioning shown, vehicle without air conditioning similar.

Fig 2: Rotating Drive Belt Tensioner Clockwise

Courtesy of FORD MOTOR CO.

Rotate the accessory drive belt tensioner and install the accessory drive belt on the power steering pump pulley.
- For vehicles with air conditioning, rotate the tensioner clockwise.
- For vehicles without air conditioning, rotate the tensioner counterclockwise.