Acceleration Control

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The acceleration control consists of one of the following:

a fixed accelerator pedal and position sensor assembly.
or an adjustable accelerator pedal and position sensor assembly.

The throttle is controlled by an accelerator pedal position sensor on the accelerator pedal assembly. The accelerator pedal position sensor sends a signal to the PCM in response to throttle pedal movements initiated by the driver. The PCM sends a signal to the electronic throttle control which increases and decreases throttle position.

Some vehicles are equipped with adjustable pedals. This allows both the accelerator and brake pedals to be adjusted simultaneously forward or rearward. A rocker switch on the instrument panel provides adjustment on the pedal assembly when it is activated. On vehicles with the memory seat option, the pedal position can be controlled by the memory selection, as well as the rocker switch. The adjustable accelerator pedal can be serviced separately from the adjuster. The components in the acceleration control system are not adjustable and new components must be installed if damaged or worn.