LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1910 (Automatic Transmission - 5R110W -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Park System >> Installation >> Vehicles equipped with a fixed yoke

Vehicles equipped with a fixed yoke

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, install a new output shaft retaining nut.
    • Tighten to 200 Nm (148 lb-ft).
    Fig 1: Identifying Output Shaft With Special Tool
    G04649634Courtesy of FORD MOTOR CO.


  1. Install the output shaft flange and a new bolt.
    • Tighten to 130 Nm (96 lb-ft).
    2. Fig 1: Locating Output Shaft Flange Bolt
    GF0006819Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals