LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1910 (Automatic Transmission - 5R110W -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Extension Housing Seal >> Removal >> Vehicles with a fixed flange

Vehicles with a fixed flange

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the output shaft flange.
    • Remove and discard the output shaft flange bolt.
    • Remove the output shaft flange.
    2. Fig 1: Identifying Output Shaft Flange And Bolt
    G04615854Courtesy of FORD MOTOR CO.
  2. Using the special tool, remove and discard the output shaft nut.
    3. Fig 2: Identifying Output Shaft With Special Tool
    G04649634Courtesy of FORD MOTOR CO.
  3. Using the special tools, remove the output shaft seal.
    4. Fig 3: Identifying Output Shaft Seal
    GF0006815Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals