Vehicles equipped with a fixed flange

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Install the extension housing bolts.
- Tighten to 47 Nm (35 lb-ft).

Fig 1: Locating Transmission Extension Housing Bolts

Courtesy of FORD MOTOR CO.

Using the special tool, install a new output shaft retaining nut.
- Tighten to 200 Nm (148 lb-ft).

Fig 2: Identifying Output Shaft With Special Tool

Courtesy of FORD MOTOR CO.

Install the output shaft flange and a new bolt.
- Tighten to 130 Nm (96 lb-ft).

Fig 3: Locating Output Shaft Flange Bolt

Courtesy of FORD MOTOR CO.