Transmission Fluid Cooler: Notes
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool |
NOTE:
Cleaning and backflushing the transmission fluid cooling system along with following all the normal cleaning and inspection procedures during disassembly and reassembly will keep contamination from entering the transmission, causing a repeat repair.
When internal wear or damage has occurred in the transmission, metal particles or clutch plate material may have been carried into the torque converter and transmission fluid cooler. These contaminants are a major cause of recurring transmission troubles and must be removed from the system before the transmission is put back into use.