LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1909 (Engine System - General Information - F250-F550 (Gasoline)) >> General Procedures >> Flywheel Inspection

Flywheel Inspection

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The flywheel cannot be resurfaced, it must be replaced.
    Fig 1: Inspecting Flywheel
    GF0002365Courtesy of FORD MOTOR CO.
  1. Inspect the flywheel for:
    • Any cracks.
    • Worn ring gear teeth.
    • Chipped or cracked ring gear teeth.
    • Scratches, nicks and discoloration.