LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1909 (Engine System - General Information - F250-F550 (Gasoline)) >> General Procedures >> Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the appropriate Engine article for the procedure.
  1. Use a telescoping gauge to determine the inner diameter of the connecting rod bushing, if equipped.
    Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing
    G03885034Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    Fig 2: Measuring Telescoping Gauge Using Micrometer
    G03885035Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals