Description And Operation: Engine
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When repairing engines, all parts must be contamination free. If contamination/foreign material is present when repairing an engine, premature engine failure can occur.
NOTE:
This section contains information, steps and procedures that may not be specific to your engine.
This section covers general procedures and diagnosis and testing of the engine system, except for exhaust emission control devices, which are covered in the Powertrain Control/Emissions Diagnosis Manual.
The engine incorporates the following features:
- a closed positive crankcase ventilation (PCV) system. For additional information, refer to ENGINE EMISSION CONTROL article.
- an evaporative emission control system. For additional information, refer to EVAPORATIVE EMISSIONS article.
Some engines incorporate a fail-safe cooling system. Refer to the appropriate Engine article for the procedure.
The engine, fuel system, ignition system, emissions system and exhaust system all affect exhaust emission levels and must be maintained according to the maintenance schedule. Refer to the scheduled Maintenance Guide.
Correct engine identification is required to order parts. Refer to the appropriate Engine article for the procedure.