LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1908 (Exhaust System -- F250-F550 Super Duty) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Exhaust manifold-to-Y-pipe studs 40 30 -
Exhaust manifold-to-Y-pipe nutsa - - -
Catalytic converter Y-pipe-to-muffler inlet pipe flange nuts 40 30 -
Bracket and insulator nuts 20 15 -
Bracket and insulator bolt 20 15 -
Exhaust coupling 55 41 -
Turbocharger-to- downpipe clamp (diesel engines) 10 - 89
Exhaust downpipe-to-converter inlet nuts (6.0L diesel engine) 47 35 -
Transmission fill tube bracket-to-engine (6.0L diesel engine) 12 9 -
EGR cooler clamp 12 9 -
Exhaust inlet pipe-to-exhaust manifold nuts 27 20 -
Heated oxygen sensor (H02S) 46 34  
Catalytic monitor sensor 46 34  

a Refer to the procedures in this article.