LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1907 (Climate Control - F250-F550) >> Removal And Installation >> Clutch and Clutch Field Coil >> Removal

Clutch and Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor  in this article.
    2. Fig 1: Using Special Tool To Hold A/C Disc And Hub Assembly
    G03952015Courtesy of FORD MOTOR CO.
  2. Remove the A/C clutch disc and hub retaining bolt.
    • Hold the A/C clutch disc and hub with the special tool.
    • Remove the bolt.
    3. Fig 2: Removing A/C Clutch Disc And Hub Retaining Bolt
    GF0008008Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub spacers.
    • Thread an 8 x 1.25 mm bolt into the A/C clutch disc and hub to force it from the compressor shaft.
    • Lift the A/C clutch disc and hub, and the A/C clutch disc and hub spacer from the compressor shaft.
  4. Remove the pulley snap ring.
    Fig 3: Locating Pulley Snap Ring
    GF0008051Courtesy of FORD MOTOR CO.
  5. Remove the A/C clutch pulley.
    • Install the special tool.
    • Remove the A/C clutch pulley.
    Fig 4: Identifying A/C Clutch Pulley
    GF0004395Courtesy of FORD MOTOR CO.
    6. CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
    Fig 5: Identifying A/C Clutch Field Coil
    GF0008052Courtesy of FORD MOTOR CO.
  6. Remove the A/C clutch field coil.
    • Install the special tool on the nose opening of the A/C compressor.
    • Install the special tool.
    • Remove the A/C clutch field coil.
scientia non olet · About LEMON Manuals