LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1905 (Engine - 6.8L (3V) -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Flywheel >> Removal

In-Vehicle Servicing: Flywheel: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: It is not necessary to remove the transmission from the jack.
  1. Remove the clutch. For additional information, refer to CLUTCH article.
  2. Remove the 8 bolts and the flywheel.
scientia non olet · About LEMON Manuals