LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1905 (Engine - 6.8L (3V) -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Crankshaft Rear Seal with Retainer Plate >> Installation >> Vehicles with automatic transmission

Vehicles with automatic transmission

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flexplate. For additional information, refer to Flexplate  in this article.
  2. Using the special tools, raise the engine.
    Fig 1: Identifying Special Engine Support Tools
    G04647876Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals