LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1904 (Engine - 5.4L (3V) - F250 & F350) >> In-Vehicle Servicing >> Crankshaft Rear Seal with Retainer Plate >> Removal

Crankshaft Rear Seal with Retainer Plate: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to Oil Pan  in this article.
  2. Using the special tools, remove the crankshaft oil slinger.
    • Discard the crankshaft oil slinger.
    Fig 1: Removing Crankshaft Rear Oil Seal Slinger
    G03920149Courtesy of FORD MOTOR CO.
  3. Using the special tools, remove the crankshaft rear seal.
    • Discard the crankshaft rear seal.
    Fig 2: Removing Crankshaft Rear Seal
    G03920150Courtesy of FORD MOTOR CO.
  4. Remove the 6 bolts and the crankshaft rear seal retainer plate.
scientia non olet · About LEMON Manuals