LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1904 (Engine - 5.4L (3V) - F250 & F350) >> In-Vehicle Servicing >> Camshaft Roller Follower >> Installation >> All camshaft roller followers

All camshaft roller followers

WARNING: This page is about a different car, the 2007 Ford Pickup and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: If the components are to be reinstalled, they must be installed into their original locations.
    NOTE: Lubricate the camshaft roller followers with clean engine oil prior to installation.
    Fig 1: Identifying Special Tool For Removing/Installing Camshaft Roller Followers
    G03919946Courtesy of FORD MOTOR CO.
  1. Using the special tool, compress the valve spring and install the camshaft roller follower.
  2. Repeat the previous step for each camshaft roller follower being serviced.
scientia non olet · About LEMON Manuals