LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1893 (Transfer Case - F250-F550 Super Duty) >> Removal >> Transfer Case >> Vehicles equipped with automatic transmissions

Vehicles equipped with automatic transmissions

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 4 RH crossmember bolts.
    Fig 1: Locating RH Crossmember Bolts
    GF0007189Courtesy of FORD MOTOR CO.
  2. Remove the 3 LH crossmember bolts.
    Fig 2: Locating LH Crossmember Bolts
    GF0007190Courtesy of FORD MOTOR CO.
  3. Remove the transmission mount nuts and the crossmember.
    Fig 3: Locating Transmission Mount Nuts And Crossmember
    GF0007622Courtesy of FORD MOTOR CO.
  4. Remove transmission bolts and the transmission mount.
    Fig 4: Locating Transmission Bolts And Transmission Mount
    GF0007623Courtesy of FORD MOTOR CO.
  5. Position a suitable jack stand under the extension housing.
    Fig 5: Positioning Suitable Jack Stand Under Extension Housing
    GF0007624Courtesy of FORD MOTOR CO.